McMurray Oil Saturation

Have you ever wondered what rich McMurray oil saturation looks like at the shaker and in cuttings? See a short video of heavy oil saturated McMurray sand on the shale shakers:    

GeoConvention 2018

Joint CSPG-CWLS-CSEG Convention: GeoConvention 2018 We are pleased to be part of GeoConvention 2018 again this year. Chinook Consulting will be on the exhibit floor at the TELUS Convention Centre at booth 218 from Monday, May 7th to Wednesday, May 9th. Register at the link below for a Free Exhibit Hall Pass. We look forward to […]

SAGD and Heavy Oil Development

Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS) SAGD/CSS is an unconventional resource development that is widely used to extract bitumen from underground oil sands deposits. These methods involve injecting steam into sub-surface oil sands deposits to heat the bitumen locked in the sand, thereby lowering the viscosity allowing it to flow and to be extracted. In […]

Geosteering in the WCSB

What Works, What Doesn’t Not all plays are equally suitable for a geosteering approach. While geosteering is the preferred method of reservoir navigation in unconventional shale and siltstone reservoirs, the approach is also used in conventional tight oil and gas clastic resource plays, as well as in some heavy oil plays and carbonate reservoirs. This […]

Reservoir Navigation Workshop April 2018

Introduction to Geosteering   What: Basics of Geosteering training When: April 5 & April 6, 9AM to 3:30PM Where: Chinook Consulting – 301 14 St NW, Main level boardroom   The workshop will walk you through fundamentals of geosteering, geosteering principles and use of StarSteer geosteering software. Please bring with you the following: A laptop running windows, […]

Drilling Optimization Approach

At Chinook Consulting Services we define Drilling Optimization as: Constructing a well that meets all objectives, for both reservoir access and data gathering, at the lowest possible cost and/or time without compromising HS&E or wellbore quality   In order to meet this objective, we believe that the most two main areas focus should be: Borehole […]